Machinist Tools for sale. Updated 08-06-2020  -  07:13
Contact Jack at jackhoying@outlook.com if you are interested in something, or have questions.  Payment can be by PayPal or check/money order.
Prices include shipping.  Discounts for multiple orders.

Measurement Tools Page - Click Here (dial indicators, height gages, inside micrometers, radius gages, etc)UPDATED 07-09-2020
Micrometers Page - Click Here (many micrometers ranging from 1" to 8") UPDATED 06-21-2020
Large tools that don't have shipping prices added (Local pickup or shipping arrangements can be made)
Drill Bits, Taps, End Mills and slitting/slotting blades

I have bulk bandsaw blade stock (Starrett, etc) in sizes from 3/8" to 3/4", along with some 1" in shorter lengths

5" sine plate - 1.5" wide - removable fence - 1/4" tapped holes in top -  $32.00 shipped



Mitutoyo 8" dial calipers 505-627  - very nice condition with case - dial is not clocked in the vertical position - $58.00 shipped




Spring loaded tap follower - 1/2" diameter  -  $15.00 shipped



Edge Finders  -  Brown & Sharpe one has a .500 body with.500" and .200"  ends  -  Unmarked one with .375 body has .200" and pointed ends -  $22.00 shipped



Brown & Sharpe 0-1" depth gauge - body is shop built  -  1/4" shaft -  3/4" x 2 3/8" base - $29.00 shipped



Fluke T5-1000 Electrical Tester - Very nice condition  - $95.00 shipped




Metric tapered hole gage - $15.00 shipped



Import indicator tip assortment  -  $16.00 shipped



Armstrong #406 C-Clamp -  6" with deep throat  -  $37.00 shipped



Crescent wrenches  -  15" and 8"  -  U.S.A. made  -  $42.00 shipped (large flat rate box)



5" Sine Bar blocks - enough to stack up to 24 degrees  -  $22.00 shipped




SOLD  -  Brown & Sharpe 12" Machinist Square -  $68.00 shipped




6" machinist square - made in India - $25.00 shipped



Magnetic base / indicator holder  -  $14.00 shipped




SOLD  -  Starrett 827A edge finder -  3/8" shank , .200 pin   -   $17.00 shipped

SOLD - Mighty Mag base with 1" range Westoff dial indicator - nice working condition - scuff in center of face, but it's clear where you read - great for use on a lathe  -  $27.00 shipped



Fly Cutter - 3/4" shank, uses 1/2" tooling  -  $17.00 shipped



SOLD  -  Brown & Sharpe 0-3" depth gage with one leg of base ground away for close clearance -  $31.00 shipped

SOLD  -  Brown & Sharpe Wiggler Set  -  $18.00 shipped




Jumbo Sine Bar   - 18" overall, 15" sinde  -  2.25" wide x 3" tall - threaded holes on top and ends -
has some corrosion staining, as you can see in the photos, but the surface is better than it looks in the photo
Made by MidState Mold and Tool  - $90.00 shipped - Or Best Offer





SOLD - Williams 11/16" wrench  -  $12.00 shipped



Williams hook pin wrench for 2 1/4" diameter - $21.00 shipped




SOLD  -  Carbide Scribe - $13.00 shipped



Greenfield Tap & Die Little Giant 5/16" threading die - adjustable depth of threading tooling - 2.75" overall  -  $22.00 shipped




SOLD - 5" sine bar - 6" x 1.2" top surface - $28.00 shipped

SOLD  -  General center punches and pin drivers - about half have condition problems and should be touched up (or re-purposed) $21.00 shipped

SOLD  -  Indicator accessory 1/4" mounting rod (typically for Starrett back plunger style indicators)  $16.00 shipped



Surface grinder wheel dressing blocks - hex block can be mounted at an angle  -  $22.00 shipped





1/8" letter and number punches  -  "L" is missing  -  $17.00 shipped



3/4-10 and 5/8-11 Heimann transfer screw sets  - $38.00 shiped



Import magnetic indicator stand  -  $18.00 shipped



Miscellaneous parallels -  mostly 4" long  -  5 sets are pairs -  $19.00 shipped




Narrow edge parallels / hold downs  -  $19.00 shipped




SOLD  -  Jacobs No. 32 chuck with MR 2 arbor.  0-3/8" capacity - U.S.A. -  Nice condition  $32.00 shipped




H.E. Crawford Co. scribe  -  $11.00 shipped



Union Tool edge scribe -  about 3/4" of adjustment in scribe length  -  $13.00 shipped




Starrett #272A radius gage  -  $23.00 shipped




9 pcs. -  2C collets - Hardinge 9/32", 3/8", 7/16", 1/2", 17/32", 9/16", 5/8", 3/4", 15/16"  -  $95.00 shipped



Starrett Last Word indicator  -  dial is faded some, but it works great  -  $28.00 shipped



Putnam Tool 2" radius end mill -  sharp  -  1 1/2" shank  -  $32.00 shipped




Hardinge 3S collets - like new condition  -  1/8", 5/32", 3/16", 1/4", 3/8", 7/16", 9/16", 5/8", 11/16", 3/4" -  $42.00 shipped




Starrett 178MB Metric radius and fillet gage - discoloration in photo is oil tarnish, not rust  -  23.00 shipped



Starrett 178MA Metric fillet and radius gage - nice condition  -  $23.00 shipped



SOLD  -  Starrett T483XRL-2 V-Anvil micrometer - 1-2" range  -  .0001 -   never used - over $900.00 new!  -  $155.00 shipped (more photos on the micrometers page, link at top of page)



Brown & Sharpe #716 29 degree screw thread gauge - $28.00 shipped





Large 12" crank handle - 3/4" ID bore with keyways  - $36.00 shipped



5" crank with 5/8" ID, tapered locking pin hole - $19.00 shipped



Billings 5/8" square drive handle  -  $21.00 shipped



Valentine / Jacobs Flex Collet - 15/32" to 1/2" capacity  -  $17.00 shipped



Proto Vintage wood handle Phillips screwdriver $14.00 shipped



Chuck backplate for L0 mount - 6 1/8" diameter at largest -  $68.00 shipped




Brass / Steel transfer blocks, magnetic parallels.   These are heavy, about 8 pounds for the set.   $48.00 shipped




Brown & Sharpe Metric radius gage - $17.00 shipped



 S-K Punch Set  -  3/32, 1/8, 5/32, 3/16, 1/4 and 5/16"  -  $27.00 shipped



Dressing Wheel Block - 1" x 2" x 3" block with removable 17 point diamond  -  $22.00 shipped




SOLD - General trammel set - come with steel beams 8", 12" and 24" - includes two points and a pencil holder - $42.00 shipped ($20.00 shipped without the beams)




Test indicator mounting arm  -  1/2" x 1/4" bar with a .215 pin  -  $11.00 shipped





Screw Extractor set (not all original to the set)  $11.00 shipped




Taper Shank Adapter  -  #5 Morse Taper External  to  #10 Brown and Sharpe Internal  -  $32.00 shipped




Large tapered pin reamer - $30.00



Jacobs Flex Collets  -  1/16" through 3/4"  -  $80.00 shipped




Walton Tap Extractors - 4 flute - 7/16", 1/2", 5/8", 3/4", 7/8" and 1" are new - 5/16" is used, 3/8" has two missing legs  -  $68.00 shipped



7/16" square drive wrench  -  $16.00 shipped




New Bridgeport knee lift gear assembly - bevel gear, bearing and handle drive connection  -  $85.00 shipped



Buckeye HD hand grinder  -  runs good  -  uses 3/8" ID wheels (spacer in the arbor for photo)  -  $68.00 shipped




Skodco Kron hacksaw blades - 10 to a pack -  high end blades, made in Sweden  -  $10.00 shipped, $7.00 for additional packs




Sheffield Vertical Gage - base and upper movable contact point have a carbide lip -  heavy and very well made!
Can be used to test for vertical (set from a known square gage), or it can be set for a known offset.  -   $58.00 shipped




Box of 500 Pop Rivets  -  AD 34 BS  -  $19.00 shipped - 4 boxes available  - (additional boxes, or when shipping with another item $12.00)




#9 Easy-Out  - 1" at the small diameter  -  $17.00 shipped




Hex hold down bolts -  7/16" threads  -  5", 6" 7" and 8" long -  $22.00 shipped



Besides the below wrenches, I have several other styles and sizes.  Just ask.
Fairmount Wrench - 1 1/4" and 1 5/8"  -  5/8 thick jaws  -  $34.00 shipped



Williams 410 LS Hook Wrench   -  $27.00 shipped (I have many other hook and pin wrenches not listed...ask if you need a specific one)



Pratt & Whitney protractor for square blades  -  $24.00 shipped




CA sized cut-off blade holder - 7/8" tall blade capacity  -  $35.00 shipped


AD-013 GSG Zero Spindles by GLASTONBURY SOUTHERN GAGE.  Very high precision!  These are apparently mostly used on a test bench, with different face mounting systems that are available for them. 
(information on their website at http://www.gsgage.com/newpage1
The spindle sells new for over $1300.00   -   $175.00 shipped  (spindle on the right in the photo has been sold)




Used Ball Screw - Box is marked "Ball Screw & Nut from TRAX".  Steinmeyer brand  -  That's all I know about it  -  56" long  -  $??  Make offer


New Old Stock - Anderson 1/2 - 1 HP Static Phase Converter  -  with instructions -  $68.00 shipped




10" x 7 3/8" x 1" Parallels/Setup Blocks - one pair is about .010 taller than the other - $78.00 shipped





V-Block holder for screw machine / turret lathe - 1/64" to 1/2" capacity - 3/4" OD shank with 3/8" ID - $22.00 shipped





Safety Lathe Chuck Key - 9/16" - New, but the handle has rust staining  -  $22.00 shipped




Jumbo bullnose live center -Jarno Taper #12 - tapered area of hub is 5" to 8" diameter -
bearings turns smoothly - maybe the shank taper can be turned or replaced to fit your needs?  $89.00 shipped (not cheap to ship)




Radius and Angle Dresser - $175.00 shipped
A video of it in movement is at https://youtu.be/GBTXh0NZkrs

Pins above large knob lock the left / right motion

Includes new diamond (3/8" diameter)

I found this photo on-line - Looks like an older model, but the information is good to see. The pin they refer to is in the upper photo, between the oilers.  The end plate is under the cross bar, not shown



Norton 3" Speed-Lok discs - 60 grit - 50 pack - $35.00 shipped (I have a dozen boxes left)




New Mitutoyo 15" standard - $23.00 shipped (does not include the box shown)


Mitutoyo 10" Standard - $18.00 shipped
 


I have lots of broaches not listed, just ask if you need anything specific
3/4" Dumont Broach - good condition - $32.00 shipped


Dumont 3/8" Broach - good condition - $32.00 shipped


Dumont 10mm Broach -  NEW condition - Fits in .378 slot - $40.00 shipped (also have a 6mm and 8mm Dumont broaches, all three for $100 shipped)




Two pair, 20A. 125V Legrand cord ends.  Used but good working condition. $27.00 shipped



Vintage Union Tool Combination Square - Not perfect by far, but a good square for the price -  $17.00 shipped




CARR-LANE - Large, wide opening clamp - CL-1050-VTC - Sells new for $55.00 each - New old stock -  $42.00 for the pair, shipped.

SOLD  :  Hardened anvil / shaping block - 3/8" and 3/4" half rounds - tapped holes on one side  -  $42.00 shipped

SOLD - Industrial air guns - Guardair and Speedy (W.R. Brown) - U.S. made, high quality  -  $29.00 for both, shipped

SOLD  - V-Block with clamp  -  notched for drilling, or for holding shaft with a hub or bearing attached  -  $31.00 shipped

SOLD  -  Mitutoyo 0-6" depth micrometer - great condition  -   ratchet style handle - $77.00 shipped

SOLD  -  Starrett 827B edge finder - 3/8" diameter  - $15.00 shipped

SOLD  - Brown & Sharpe 1/2" edge finder  -  $13.00 shipped

SOLD  -  54 pc. Hold-Down 1/2" Bolt Set -  A bit dirty, but has seen little use  -  $65.00 shipped with rack  -  $50.00 shipped without rack

Reminder - Prices include shipping and there will be a discount for multiple purchases
Beautiful examples of shop built precision parallels, blocks, setup angles, etc (Click Here) All sold!!

Webpage containing the recently sold items 1
Webpage containing the recently sold items 2